Data Flute Logo
Brubaker Logo Decatur Diamond Logo Weldon Logo

Your Cart

Products > Aluminum & Non-Ferrous Alloys Finishing/Roughing > HVM-2

HVM-2

Aluminum & Non-Ferrous Alloys Finishing/Roughing

Product Overview:

The High Velocity Machining Series (HVM) is designed to perform at the level that its name suggests. By using shallow depths of cut, at very high speeds, this extended reach design will rough in aluminum and non-ferrous applications from peripheral cuts to deep pockets. This tool is ideal for the machine tool that has ample RPM and feed rate capabilities, but may have some horsepower or torque restrictions. 

Product Characteristics:

  • Flute Count (NOF): 2
  • Equal Index
  • Constant Helix
  • Center Cutting
  • RH-C / RH-H
  • Continuous Cutting Edge

Product Tolerances:

  • Shank Diameter (DCON): h5
  • Cutting Diameter (DC): -0.0001"/-0.0004"
  • Corner Radius (RE): +0.001"/-0.001"

Operations

HEAVY PERIPHERAL (HP) PERIPHERAL (P) LIGHT PERIPHERAL (LP) FINISHING (F)
AE 40%DC <AE≤ 80% DC 25%DC <AE≤ 40% DC 5%DC <AE≤ 25% DC ≤ 5%DC
AP 0.5 to 1.0 x DC 1.0 to 1.5 x DC 2.0 x DC APMX

Speeds and Feeds

Coatings

Dimensions are in inches

Part Number Dia (DC) Shank (DCON) LOC (APMX) OAL (OAL/LF) LBS (LU) Radius (RE) Neck DIA (DN) Number of Flutes Coating EDP Number
HVM20250 0.25 0.25 0.375 2.5 1.125 0.000 - 2 UC 51800-00-D
HVM20250C5 0.25 0.25 0.375 2.5 1.125 0.000 - 2 C5 51800-86-D
HVM20250C4 0.25 0.25 0.375 2.5 1.125 0.000 - 2 C4 51800-89-D
HVM30250 0.25 0.25 0.375 2.5 1.125 0.000 - 2 UC 51886-00-D
HVMM20250 0.25 0.25 0.375 4 2.125 0.000 - 2 UC 51830-00-D
HVMM20250C5 0.25 0.25 0.375 4 2.125 0.000 - 2 C5 51830-86-D
HVMM20250C4 0.25 0.25 0.375 4 2.125 0.000 - 2 C4 51830-89-D
HVM20375 0.375 0.375 0.5 2.5 1.125 0.000 - 2 UC 51805-00-D
HVM20375C5 0.375 0.375 0.5 2.5 1.125 0.000 - 2 C5 51805-86-D
HVM20375C4 0.375 0.375 0.5 2.5 1.125 0.000 - 2 C4 51805-89-D
HVMM20375 0.375 0.375 0.5 4 2.125 0.000 - 2 UC 51835-00-D
HVMM20375C5 0.375 0.375 0.5 4 2.125 0.000 - 2 C5 51835-86-D
HVMM20375C4 0.375 0.375 0.5 4 2.125 0.000 - 2 C4 51835-89-D
HVM20500 0.5 0.5 0.625 3 1.375 0.000 - 2 UC 51810-00-D
HVM20500C5 0.5 0.5 0.625 3 1.375 0.000 - 2 C5 51810-86-D
HVM20500C4 0.5 0.5 0.625 3 1.375 0.000 - 2 C4 51810-89-D
HVMM20500 0.5 0.5 0.625 4 2.125 0.000 - 2 UC 51841-00-D
HVMM20500C5 0.5 0.5 0.625 4 2.125 0.000 - 2 C5 51841-86-D
HVMM20500C4 0.5 0.5 0.625 4 2.125 0.000 - 2 C4 51841-89-D
HVML20500 0.5 0.5 0.625 6 3.375 0.000 - 2 UC 51866-00-D
HVML20500C5 0.5 0.5 0.625 6 3.375 0.000 - 2 C5 51866-86-D
HVML20500C4 0.5 0.5 0.625 6 3.375 0.000 - 2 C4 51866-89-D
HVM20625 0.625 0.625 0.75 4 1.625 0.000 - 2 UC 51815-00-D
HVM20625C5 0.625 0.625 0.75 4 1.625 0.000 - 2 C5 51815-86-D
HVM20625C4 0.625 0.625 0.75 4 1.625 0.000 - 2 C4 51815-89-D
HVML20625 0.625 0.625 0.75 6 3.375 0.000 - 2 UC 51871-00-D
HVML20625C5 0.625 0.625 0.75 6 3.375 0.000 - 2 C5 51871-86-D
HVMM20625 0.625 0.625 0.75 6 2.375 0.000 - 2 UC 51846-00-D
HVMM20625C5 0.625 0.625 0.75 6 2.375 0.000 - 2 C5 51846-86-D
HVMM20625C4 0.625 0.625 0.75 6 2.375 0.000 - 2 C4 51846-89-D
HVM20750 0.75 0.75 1 4 2 0.000 - 2 UC 51820-00-D
HVM20750C5 0.75 0.75 1 4 2 0.000 - 2 C5 51820-86-D
HVM20750C4 0.75 0.75 1 4 2 0.000 - 2 C4 51820-89-D
HVML20750 0.75 0.75 1 6 3.375 0.000 - 2 UC 51876-00-D
HVML20750C5 0.75 0.75 1 6 3.375 0.000 - 2 C5 51876-86-D
HVML20750C4 0.75 0.75 1 6 3.375 0.000 - 2 C4 51876-89-D
HVMM20750 0.75 0.75 1 6 2.5 0.000 - 2 UC 51851-00-D
HVMM20750C5 0.75 0.75 1 6 2.5 0.000 - 2 C5 51851-86-D
HVMM20750C4 0.75 0.75 1 6 2.5 0.000 - 2 C4 51851-89-D
HVM21000 1 1 1.25 5 2.625 0.000 - 2 UC 51825-00-D
HVM21000C5 1 1 1.25 5 2.625 0.000 - 2 C5 51825-86-D
HVM21000C4 1 1 1.25 5 2.625 0.000 - 2 C4 51825-89-D
HVML21000 1 1 1.25 7 4.375 0.000 - 2 UC 51881-00-D
HVML21000C5 1 1 1.25 7 4.375 0.000 - 2 C5 51881-86-D
HVML21000C4 1 1 1.25 7 4.375 0.000 - 2 C4 51881-89-D
HVMM21000 1 1 1.25 7 3.375 0.000 - 2 UC 51856-00-D
HVMM21000C5 1 1 1.25 7 3.375 0.000 - 2 C5 51856-86-D
HVMM21000C4 1 1 1.25 7 3.375 0.000 - 2 C4 51856-89-D